Eclipse AVN2210p Owner's Manual

In-dash portable navigation with cd/usb multi-source receiver
Hide thumbs Also See for AVN2210p:

Advertisement

OWNER'S MANUAL
AVN2210p
In-Dash Portable Navigation with
CD/USB Multi-Source Receiver
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for Eclipse AVN2210p

  • Page 1 OWNER'S MANUAL AVN2210p In-Dash Portable Navigation with CD/USB Multi-Source Receiver We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
  • Page 2 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN2210p. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage.
  • Page 3 WARNING ● Air bags are a vital part of an safety system. Never install main unit in a way which will alter air bag wiring or interfere with air bag deployment. Air bags must function properly in the event of an accident. ●...
  • Page 4 CAUTION ● Wiring and installing this main unit requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installer. Incorrect wiring may damage the main unit or interfere with safe vehicle operation. ● Use only the accessory parts as specified. Using other parts may cause damage to the main unit or cause parts to dislodge and fall or fly off the main unit.
  • Page 5: Operating Precautions

    Operating Precautions <Your AVN2210p will perform well over a long period of time when giving correct handling and care.> Notes on Operation • For your safety, play only at moderate volumes so that you can still hear exterior sounds. • Discs with the logo shown to the left can be played.
  • Page 6: Basic Operation

    Basic Operation Adjusting the Sound Muting the Volume Press the [MUTE] button. To cancel muting, either press the [MUTE] button again or turn the [VOL] rotary knob to the right. While the audio system is muted, navigation voice guidance continues unmuted. Setting Guide Tone Press the [FUNC] button to establish the FUNCTION mode.
  • Page 7: Switching Audio Control Modes

    Switching Audio Control Modes The modes will switch one step in the order shown below each time the [ENTER] button is pressed. BASS TREB NON-F NF-P LOUD BASS Turn the [VOL] rotary knob to the right or left in the audio mode while referring to the table below to adjust the sound.
  • Page 8 Mode Function [VOL] rotary knob/Function LPF ON : Only allows lower Turn to the right frequencies (low range) through. Adjusts frequency (Low Pass Filter for LPF OFF : filtering settings. Sub-Woofer output) Allows all frequencies Turn to the left through regardless if the frequencies are low or high.
  • Page 9: Switching Between The Audio And Navigation Screen

    Switching Between the Audio and Navigation Screen Each time you press the [SCREEN] button the display switches between the audio screen and the navigation screen. Turning the PND Display ON and OFF While the PND display is OFF, press the [SCREEN] button. The PND display will come ON.
  • Page 10 Switching Between Left and Right Speaker Output for the Navigation Voice Voice guidance speaker output can be switched between the right and left speakers. Press the [SOURCE/PWR] button for more than one second to turn the audio mode OFF ("GOOD BYE" will momentarily be displayed). You can switch between right and left speakers by pressing the [FUNC] button and the [SCREEN] button simultaneously for more than 3 seconds.
  • Page 11: Using The Audio Cover

    Using the Audio Cover Using the Audio Cover After removing the PND from the main unit, it is recommended to use the optional Audio Cover which comes with TRK-107p*. * TRK-107p: Sold separately How to Insert the Audio Cover Insert the left end of the Audio Cover into the main unit. Engage the catch at the left end of the Audio Cover with the lock on the main unit.
  • Page 12: How To Detach The Audio Cover From The Main Unit

    How to Detach the Audio Cover from the Main Unit Press the [Release] button. The right end of the Audio Cover detaches from the body of the main unit. Remove the Audio Cover. Hold the Audio Cover on the right side, lift up and pull it toward you to remove it. ATTENTION If the Audio Cover gets wet, do not attach it to the main unit.
  • Page 13: How To Operate The Tuner

    How to Operate the Tuner Calling up Preset Channels Press the [MODE] button to select the preset channel mode. Turn the [VOL] rotary knob to call up the station registered for a preset channel between P1 and P6. Press the [ENTER] button. The registered preset channel will be selected and the corresponding station will be received.
  • Page 14 Memorising Stations Memorising Stations Manually Tune into the station to be memorised for the preset channel. Press the [MODE] button to select the rotary select mode. Turn the [VOL] rotary knob to select one of the preset channels P1 to P6. Press the [ENTER] button until "P MEMORY"...
  • Page 15: Memorising Stations Automatically

    Memorising Stations Automatically Press the [FUNC] button to establish the FUNCTION mode. Press the [FUNC] button until the sub display switches to ASM. Press the [ENTER] button. After "ASM ON" is displayed, automatic station selection will start. A search will be conducted from the lowest frequency through progressively higher frequencies and stations with strong reception will be memorised for preset registration numbers [1] to [6].
  • Page 16: How To Operate The Cd/Mp3/Wma Player

    How to Operate the CD/MP3/WMA Player About Compact Discs • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause impaired sound quality or intermittent playback.
  • Page 17: About Cleaning A Cd

    • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for "improving sound performance" or "protecting CDs." The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. • Please be sure NOT to attach any ring-shape protector (or other accessory) to your discs.
  • Page 18: About Mp3/Wma

    About MP3/WMA ATTENTION The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3/WMA? MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3 a file can be compressed to one-tenth the size of the original.
  • Page 19: Format Of Discs

    Media The media capable of playing MP3/WMA include CD-R and CD-RW discs. Compared to the CD- ROM media commonly used for music discs, CD-R and CD-RW discs are fragile in high temperature/high humidity environments and one section of the CD-R and CD-RW may become incapable of playback.
  • Page 20: Making And Playing Mp3/Wma Files

    Multi-Sessions Multi-sessions are supported, and CD-R and CD-RW discs with annotated MP3/WMA files can be played. However, when "Track at once" has been written, close the session or process the warning message. Use the same format for each session (don’t change the format). Playing MP3/WMA When a disc with recorded MP3/WMA files is inserted, the main unit first checks all the files on the disc.
  • Page 21 Writing to a CD-R/CD-RW MP3/WMA files can be recorded on CD-R/RW by using a CD-R/RW drive connected to a computer. Record by setting the recording format of the recording software to ISO9660 level 1 or level 2 (not including the extension format). Select CD-ROM ( mode1 ) or CD-ROM XA ( mode2 ) for the disc format.
  • Page 22: Fast Forward/Rewind

    Skipping to the Next Track (File)/Returning to the Beginning of a Track (File) Press the [SELECT(Right/Left)] button. Right: Advances to the next track (file). Left (pressing once): Returns to the beginning of the track (file) being played. Left (pressing more than two times): Returns to the previous track (file). FAST FORWARD/REWIND Press the [SELECT(Right/Left)] button for more than one second.
  • Page 23: Repeat Track

    Repeat Track Press the [FUNC] button while a CD track is being played to switch to RPT on the sub display. Press the [SELECT (Right/Left)] button to select RPT ON or OFF. Right: ON Left: OFF Press the [ENTER] button. The track being played is played again.
  • Page 24 Scan Files/Folders Press the [FUNC] button while an MP3/WMA file is playing to switch to SCAN on the sub display. Press the [SELECT (Right/Left)] button to select the scan setting. Press the [SELECT(Right/Left)] button to switch the mode in the following sequence: Right: SCAN ALL Left: SCAN ONE Press the [ENTER] button.
  • Page 25: Switching Between Cd-Da And Mp3/Wma

    When an MP3/WMA file is playing Press the [TEXT] button to switch the display on the sub display. Press the [TEXT] button to switch the screen's display pattern in the following sequence: Folder name/File name Artist/Title Folder No. /File No. Playing time Folder name/File name...
  • Page 26: How To Operate The Usb Music File Player

    How to Operate the USB Music File Player About Playable USB Memory Standards • Supported File System: FAT 16/32 • Playable Audio Format: MP3 • Max.Current: 500mA • Compatibility: USB1.1/2.0 (Maximum transmission speed equivalent to USB 1.1: 12 Mbps) • Correspondence: USB mass storage class (Playing from an external HDD is not supported) Playable MP3 File Standards •...
  • Page 27 [Configuration example for USB memory supporting MP3] 001.mp3 002.mp3 003.mp3 004.txt 005.mp3 Number of files possible on a single USB memory is 3000. Files aside from MP3 files (Example: 004.txt) will be included as one of the 3000 files. 1498.mp3 1499.mp3 3000.mp3 Skipping to the Next File/Returning to the Beginning of the File...
  • Page 28: Repeat Song

    Random File Order (Shuffle Songs) Touch "Preferences". Touch "Shuffle songs ". All music files in the USB memory are played in random order. Repeat Song Touch "Preferences". Touch "Repeat song ". The music file currently being played is repeated.
  • Page 29: File Search

    File Search Touch "Select". Song title Artist name Album name Touch "Playlist", "Artist", "Album", "Song" or "Genre". Touch the name of the music file to be played. The selected file in the USB memory is played. are displayed, you can change the displayed page of the music file list by touching them.
  • Page 30 You can search for a music file by entering alphanumeric characters. CAUTION • Music files in the USB memory can be played only when the PND is attached to the main unit. • Do not remove the USB memory without first switching the display to the audio screen and then touching the switch.
  • Page 31 ® How to Operate with an iPod An iPod can be connected to the main unit using an optional dedicated connection cable, allowing you to listen to iPod music files and operate some iPod functions from the main unit. An iPod is for legal or right-holder-authorized copying only. Don't steal music. iPod is a trademark of Apple Inc., registered in the U.S.
  • Page 32 Repeat Song Touch "Preferences". Touch "Repeat song ". The iPod music file being played will be played again. File Search Touch "Select". Song title Artist name Album name Touch "Playlist", "Artist", "Album", "Song" or "Genre".
  • Page 33 Touch the name of the music file to be played. The selected file in the iPod will be played. are displayed, you can change the displayed page of the music file list by touching them. You can search for a file name or the name of an artist by touching "Find". You can search for a music file by entering alphanumeric characters.
  • Page 34: Switching The Aux Mode On And Off

    How to Operate the Portable Audio Player Use an optional AUX105 to connect a portable audio player to the main unit. Switching the AUX Mode ON and OFF Press the [SOURCE/PWR] button for more than one second to turn the audio mode OFF.
  • Page 35: Things You Should Know

    Things You should Know If One of These Messages Appears If any of the following messages is displayed on the sub display, check the equipment while referring to the Cause and Corrective action columns. Messages Cause Corrective action CD/MP3 INFO 3 DISCS ARE DIRTY OR The loaded disc is dirty or upside DAMAGED...
  • Page 36: Before Asking For Repairs

    Before Asking for Repairs Slight differences in operation can sometimes be mistaken for malfunctions, so check the following table before asking for any repairs. CAUTION If a problem occurs, for instance when the main unit does not respond to any button operation, or the display does not work correctly, press the [Reset] button using a paper clip or anything similar.
  • Page 37 *: Depending on your mobile phone, the mute function may not work correctly. If it doesn't, press the [MUTE] button on the main unit. Also, refer to the ECLIPSE web site whose address is given below for details on applicable phone models. (http://www.eclipse-web.com.au)
  • Page 38: Specifications

    Specifications <GENERAL> Power Supply 13.2V DC (11-16V) Current Drain Dimensions (whole unit) (W x H x D) 7" x 4" x 6-1/2" (180 x 100 x 165mm) Weight (whole unit) 5.5lbs (2.5kg) Dimensions (PND only) (W x H x D) 4"...
  • Page 39 <AUDIO AMPLIFIER> Power Output 14W x 4 (20Hz~20kHz, 1% THD, 4Ω, Vcc=14.4V) Max. 50W x 4 Output Level/Impedance 5V/55Ω line-out impedance Loudness +9dB at 100Hz/+6dB at 10kHz...
  • Page 40: How To Contact Eclipse

    How to Contact ECLIPSE Fujitsu Ten (Australia) Pty Ltd ECLIPSE Australia 89 Cook Street Port Melbourne, Victoria 3207 Australia Phone: 1800 211 411...

Table of Contents