Mount Stand And Control Circuitry Cabinet; Mount The Stand Parts - Duerkopp Adler 530 Installation Instructions Manual

Cnc automat for button sewing
Hide thumbs Also See for 530:
Table of Contents

Advertisement

3.

Mount stand and control circuitry cabinet

3.1 Table tops

3.2 Mount the stand parts

3
The cutouts of self-manufactured table tops must have the dimensions
indicated in the sketch.
Caution: Danger of injury !
The table tops must have the required load-carrying capacity
and strength.
Mount the individual parts of the stand as shown in the illustration.
Set the adjusting screw 3 to ensure the stability of the stand.
All four feet of the stand must touch the floor.
Screw pedal 2 on the stand strut 1.
Align pedal laterally.
Shift the pedal sideways so that it is positioned centrally to the oil pan.
The stand strut is provided with slotted holes for aligning the pedal.
1
2
2
5

Advertisement

Table of Contents
loading

Table of Contents