Advertisement
Step 3. With the large washer attached, pass the lag screw
through the center hole of the crosbar mounting bracket
and screw into guide hole. Tighten until outlet box is fi rmly
mounted to beam. This box must be secured fi rmly to the
ceiling. We recommend that the ceiling fi xture outlet box
be of suffi cient capacity enabling it to support the weight
of fan and light fi xture under any conditions.
CANOPY
HATCH
Step 4. Attach the canopy to the crossbar mounting bracket with three of
the 8-32 x 2
1
" long canopy screws and lock washers provided with your
/
2
Casablanca fan. Hand-tighten until snug against the ceiling.
Note: On sloped ceilings, align the
canopy opening toward the top or
peak of the room.
LAG SCREW INSTALLATION
CANOPY HARDWARE
CANOPY
CANOPY INSTALLATION
V
ERRAZANO
LAG
SCREW
CANOPY LOCK WASHER (4)
FEED OUTLET BOX
WIRES THROUGH
CANOPY OPENING
™
LARGE
WASHER
CANOPY SCREW (4)
CANOPY
LOCK
WASHER
CANOPY
SCREW
5
Advertisement
