Advertisement
W
AILEA
Step 6. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 7. Install canopy hatch with the last
canopy screw and lock washer. To do this,
tilt the fan body away from the hatch
opening.
Using the screwdriver, tighten the screws
firmly by hand only.
Step 8. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
BLADE HOLDER
SCREW
(3 PER BLADE)
BLADE HOLDER
WASHER
(3 PER BLADE)
Step 9. Attach each blade to a blade
holder securing it with the four blade
screws provided.
Using the screwdriver, tighten securely
by hand only.
6
TM
CANOPY HATCH INSTALLATION
Note: Write down the
Serial Number and the
model number for future
reference.
BLADE TO BLADE HOLDER INSTALLATION
BLADE & BLADE HOLDER HARDWARE
BLADE INSTALLATION
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
BLADE
HOLDER
BLADE HOLDER
SCREW
(3 PER BLADE)
BLADE HOLDER
WASHER
(3 PER BLADE)
BLADE
HOLDER
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
BLADE HOLDER
SCREW
(2 PER BLADE)
BLADE
Advertisement
