Versa•Touch Operation - Casablanca Star Owner's Manual

VERSA•TOUCH2™ CONTROL INSTALLATION
VERSA•TOUCH2™ HARDWARE (not to scale)
W-72
W-72
Control Control Holder
SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control
Step 12. Follow instructions for the type of transmitter control bracket you will be using.
INNER
MOUNTING
HOLES
CONTROL
BRACKET
Standard Light Switch
Step A. Remove the two screws holding the switch
cover plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line
up the two inner mounting holes with those on the
switch.
Step C. Insert and tighten the screws using the
provided screwdriver.
Wall Installation
Step A. Locate a 2x4
wall stud in a convenient
l ocation.
Step B. Orient the control
bracket as shown over
the 2x4 stud.
Step C. Insert the 1" wood
screws in either the inner
or outer mounting holes
and tighten using the
provided screwdriver.
10
12v Battery
CONTROL BRACKET INSTALLATION
switch. CAUTION! Do not use with wall dimmer.
device. Use only the control provided with this fan.
STANDARD
TOGGLE
SWITCH
SWITCH
COVER
PLATE
Wood
Drywall
Screw
Anchor
1" (2)
6-32 (2)
OUTER
MOUNTING
HOLES
CONTROL
BRACKET
Rocker Light Switch
Step A. Break off the two tabs by pushing outward.
Step B. Remove the two screws holding the switch
cover plate. Do not remove the cover plate.
Step C. Orient the control bracket as shown and line
up the two inner mounting holes with those on the
switch.
Step D. Insert and tighten the screws using the
provided screwdriver.
NOTE: The wall anchors and 6-32 x 1" screws may
be used in situations where mounting to a stud is
not possible. Use the inner mounting holes. After
securing the anchor, discard the anchor's pointed
screws and use the 6-32 decor ovalhead screws
supplied.
ANCHOR
PANHEAD
SCREW
WOOD
SCREW 1"
Screw Screw
6-32 X / " 6-32 X 1"
3
8
(2) (2)
ROCKER
LIGHT
SWITCH
SWITCH
COVER
PLATE
DRYWALL ANCHOR
DECOR OVALHEAD SCREW
6-32 X 1"