Casablanca Star Owner's Manual page 7

Step 4. To hang the fan body in the canopy, hold the fan
body firmly and insert the ball into the canopy opening.
Check that no wires were pinched. Rotate the fan body
until the slot in the nylon ball fits into the pin opposite
the canopy opening.
CANOPY ELECTRICAL CONNECTIONS
Step 5a. Attach the fan wires to the ceiling fixture
outlet box wiring by twisting the bare ends of the wires
together and then securing with a wire nut. Test that
the connection is secure by pulling on the wire nut.
Connect in this order:
Step 5b. Wiring Connections
• GREEN leads from mounting plate and fan to
GROUND conductor of power source. Secure with
wire nut.
• WHITE wire from fan to white NEUTRAL wire in
ceiling fixture outlet box. Secure with wire nut.
• BLACK power wire from fan to BLACK power wire
in ceiling outlet box. Secure with wire nut.
WIRE NUT
CANOPY HATCH INSTALLATION
Step 6. Tuck the wires into the canopy with the
wire nuts pointed upwards, so that the WHITE
and BLACK wires are on opposite sides of the
canopy and all wires are clear of the canopy
opening.
Step 7. Install canopy hatch with the last canopy
screw and lock washer. To do this, tilt the fan
body away from the hatch opening.
Tighten the screws firmly by hand only.
Step 8. Straighten the fan, then check to ensure
that there is no movement between the canopy
and ceiling or Hang-Tru ball and top support
shaft.
S
tar
HANGING THE FAN
2 BLACK WIRES
2 WHITE WIRES
WASHER
CANOPY
SCREW
TILT THE FAN TO
CANOPY SCREW
/ S
™
tarlet
BALL
SLOT
3 GREEN WIRES
CANOPY
HATCH
LOCK
INSTALL LAST
™
PIN
CANOPY
7