Light Kit (continued)
Lift the lower switch housing up
until the holes line up with the screw
holes in the upper switch housing.
Note: In compliance with US federal energy regulations, this ceiling
fan contains a device that restricts its light output. Exceeding the
wattage limit marked on the MAX wattage sticker affixed to the
light socket(s) may result in fire hazard or improper operation.
Install the two light kit
attachment screws, found in
the
hardware bag.
17
M8513-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of the same wattage.
Note: Glass shade style and number of lights may vary.
www.CasablancaFanCo.com
See next page for fan
operation instructions.
1.888.227.2178