Xerox WorkCentre 5020 User Manual page 54

<Copy Output> button
Select whether or not to collate the output.
For more information, refer to "<Copy Output> button" (P.30).
3.
Press the <Paper Supply> button to
select a tray.
Note
4.
Enter the copy quantity using the
numeric keypad. The entered number
appears in the Display.
Note
5.
Press the <Start> button to start the
copy job.
Note
Xerox WorkCentre 5016/5020 User Guide
• Press the <Paper Supply> button
repeatedly until the desired tray is
lit on the Machine Diagram (mimic).
For information on the <Paper
Supply> button, refer to "<Paper
Supply> button" (P.23).
• When Tray 1 and Tray 2 are lit
simultaneously, the machine
selects a tray automatically.
• When pressing the <Paper Supply> button, the size and orientation of paper of the
selected tray appears in the Display for three seconds. After that, the Display switches
back to the previously displayed value.
• If you enter an incorrect value,
press the <C> button to clear a
wrongly entered value.
• When using the Document Glass
with certain copy features, such as
Collate, 2-sided, and N-up, the
indicator next to the <Scan
Completed> button blinks after the
first document has been scanned.
Load and scan the next document
while the button is blinking. After
scanning the last document, press
the <Scan Completed> button.
Copying Procedure
<Paper Supply>
Numeric keys
<C> button
<Start> button
<Scan Completed>
button
button
54