Xerox WorkCentre 5020 User Manual page 30

<Copy Output> button
Press this button to select whether or not to
collate the output copies.
Note
Note
Xerox WorkCentre 5016/5020 User Guide
Collate
•When 1-sided is selected
Delivers the specified number of copy sets in the same order as the
original documents.
•When 2-sided is selected
Delivers the specified number of copy sets in the same order as the
original documents, and copies are made on both sides of the sheets.
• 2-sided feature is only available if the Duplex Module is installed on the machine.
Uncollate
•When 1-sided is selected
Delivers the copies in stacks based on the number of copies for each
set.
•When 2-sided is selected
Delivers the copies in stacks based on the number of copies for each
set, and copies are made on both sides of the sheets.
• 2-sided feature is only available if the Duplex Module is installed on the machine.
<Copy Output>
button
Control Panel
30