Xerox WorkCentre 5020 User Manual page 125

Menu
Number
5 Reduce/Enlarge Ratio
6 Automatic Tray Switching
7 Automatic Paper Selection
Note
8 Preset Reduce/Enlarge Zoom
Ratio
9 Sharpness (Copying)
10 Sharpness (Scanning)
11 Transition Time to Low Power
Mode
Xerox WorkCentre 5016/5020 User Guide
Menu
Select the default zoom ratio.
Note
When a tray runs out of paper
during a copy job, the machine
automatically selects another tray
that is loaded with the same size
and same orientation of paper.
This feature is called Automatic
Tray Switching.
Select whether to enable or disable
the Automatic Tray Switching
feature.
The Document Feeder detects the
document size, and automatically
• This feature is only
selects paper. This feature is
available for the
called Automatic Paper Selection.
machine equipped
Select whether or not the
with a Document
Automatic Paper Selection feature
Feeder.
is automatically enabled when a
document is loaded in the
Document Feeder.
Specify the preset zoom ratio for
one of the selections of the
<Reduce/Enlarge> button.
For information on the <Reduce/
Enlarge> button, refer to "<Reduce/
Enlarge> button" (P.24).
Select the default sharpness level
for copy jobs.
Select the default sharpness level
for scan jobs.
Select the transition time for the
machine to switch to the Low
Power Mode.
For more information on the Low
Power Mode, refer to "Low Power
Mode" (P.32).
Description
• The selectable values
change depending on the
selected measuring unit
under Metric/Inches
(menu number: 15).
System Settings
Value
Inches
0: 100%*
1: 50%
2: 78%
3: 129%
4: 200%
Metric
0: 100%*
1: 50%
2: 70%
3: 141%
4: 200%
0: Disabled
1: Enabled*
0: Disabled
1: Enabled*
50 - 200%
(Default: 64%)
0: Least Sharp
1: Less Sharp
2: Normal*
3: Sharp
4: Sharpest
0: Least Sharp
1: Less Sharp
2: Normal*
3: Sharp
4: Sharpest
1: 5 minutes
2: 20 minutes*
3: 60 minutes
4: 120 minutes
5: 240 minutes
254: Disable
125