Brother HL-2270DW Quick Setup Manual page 30

For Wireless Network Users
Error code
The machine cannot detect a WLAN access point/router that has WPS or AOSS™ enabled.
If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the WLAN access point/router.
Confirm your WLAN access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your WLAN access point/router using WPS or AOSS™,
See the documentation provided with your WLAN access point/router, ask the manufacturer
of your WLAN access point/router or ask your network administrator.
Two or more WLAN access points that have WPS or AOSS™ enabled are detected.
- Confirm that only one WLAN access point/router within range has the WPS or AOSS™
TS-08
- Try starting again after a few minutes in order to avoid interference from other access
30
method active and try again.
points.
Recommended Solutions