Configuration In Infrastructure Mode, Temporally Using A Usb Or Ethernet (Lan) Cable - Brother HL-2270DW Quick Setup Manual

Wireless Network
Configuration in Infrastructure mode, temporally using a USB or Ethernet
(LAN) cable
8
Configure the wireless
settings and install the
printer driver
IMPORTANT
• You need to temporarily use a USB cable or
Ethernet cable during configuration (cable
not included).
• You must have the wireless settings you
wrote down for your network in step 7 on
page 15 before you proceed.
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
Note
If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
b
Click Install Printer Driver, and click Yes if
you accept the license agreement.
c
Choose Wireless Network Connection and
then click Next.
Note
For Windows Vista
when the User Account Control screen
appears, click Allow or Yes.
18
® ®
and Windows 7 users,
d
Choose Brother Peer-to-Peer Network
Printer, and then click Next.
Note
Choose the option of the Firewall setting, and
then click Next.
e
Choose No, and then click Next.
f
Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
g
For USB cable users, go to h.
For Ethernet cable users, go to j.
®
Windows