For Wired Network Cable Users For Macintosh - Brother HL-2270DW Quick Setup Manual

Wired Network

For Wired Network Cable Users for Macintosh

6
Before you install
IMPORTANT
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
a
Make sure your machine is plugged in and your
Macintosh is switched ON. You must be logged
on with Administrator rights.
b
Remove the protective cap from the LAN
connector.
c
Connect the network cable to the LAN
connector marked with a
connect it to a free port on your hub.
d
Make sure the machine power switch is on.
12
a
b
It may take a few minutes for installation to
complete.
c
symbol and then
• If there is more than one of the same model
• You can find your machine's MAC Address
Macintosh
7
Install the printer driver
Put the installation CD-ROM into your
CD-ROM drive.
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
Note
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name.
(Ethernet Address) and IP Address by printing
out the Printer Settings Page. See Print the
Printer Settings Page on page 31.