Brother HL-2270DW Quick Setup Manual page 21

Wireless Network
t
A wireless LAN report will automatically be
printed.
<< WLAN report >>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
C o n n e c t i o n : O K
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
u
Choose the status as it is shown for the
Connection on the wireless LAN report. Click Next.
If your status is "Connection:OK", go to step w.
If your status is "Connection:Failed", go to step
v.
v
Click Finish. Wireless setup failed as it was
unable to associate with a wireless network.
Check the error code on the printed wireless
LAN report and refer to
Troubleshooting on page 28. Then try starting
from step b again.
w
(For USB cable users)
Disconnect the USB cable between the
computer and the machine.
(For LAN cable users)
Disconnect the network cable between your
access point and the machine, and click Next.
Wireless setup is completed.
Install the printer driver
x
Follow the on-screen instructions to complete
setup.
The installation is now
Finish
complete.
Note
• If you use a specified IP Address for the
machine, you must set the Boot Method to
Static by using the BRAdmin Light. For more
information, See Changing your machine's
network settings in the Network User's Guide.
• Depending on your security settings, a
Windows Security or antivirus software window
may appear when using the machine or its
software. Please allow or permit the window to
continue.
• XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is
the most suitable driver when printing from the
applications that use the XML Paper
Specification documents. Please download the
latest driver by accessing the Brother Solutions
Center at http://solutions.brother.com/.
®
Windows
21