Tips And Tricks; Care And Maintenance - Elektra Beckum TKHS 315 E/P Operating Instructions Manual

A
Caution!
The plastic nose must have at
least 10 mm distance to the line of
cut.

8. Tips and tricks

9. Care and maintenance

A
Danger!
Prior to all servicing:
switch machine OFF;
unplug power cable;
wait for saw blade to stop.
9.1 Saw blade change
A
Danger!
Directly after cutting the saw
blade can be very hot – burning haz-
ard! Let a hot saw blade cool down.
Do not clean the saw blade with com-
bustible liquids. Risk of injury, even
with the blade at standstill. Wear
gloves when changing blades.
When fitting a saw blade, observe the
direction of rotation!
(77)
(79)
78
A
Danger!
Do not use cleaning agents
(e.g. to remove resin residue) that
could corrode the light metal compo-
nents of the saw; the stability of the
saw would be adversely affected.
A
Danger!
Use only suitable saw blades
(see "Available accessories") – when
using unsuitable or damaged blades
parts could be explosive-like hurled
from it by centrifugal force.
Do not use
saw blades made of high speed
steel (HSS or HS);
saw blades with visible damage;
cut-off wheel blades.
A
Danger!
Mount saw blade only using gen-
uine parts.
(76)
Do not use loose-fitting reducing
rings; the saw blade could work
loose.
77
76
(78)
79 80
(79)
(80)
Saw blades have to be mounted
in such way that they do not wob-
ble or run out of balance and can
not work loose during operation.
(78)
(79)
A
Danger!
Do not extend arbor bolt tighten-
ing wrench.
Do not tighten arbor bolt by hit-
ting the wrench.
After the arbor bolt has been
tightened, remove all tools used
during saw blade installation!
81
82
9.2 Cleaning the saw blade's
height adjustment mech-
anism
9.3 Saw storage
A
Danger!
Store saw so that
it can not be started by unauthor-
ized persons, and
nobody can get injured.
A
Caution!
Do not store saw unprotected
outdoors or in damp environment.
(79)
(81)
(82)