Table of Contents
Advertisement
8.5
Sawing with the mitre
fence
A
Caution!
The plastic nose must have at
least 10 mm distance to the line of
cut.
9. Tips and tricks
•
•
•
•
10. Care and maintenance
A
Danger!
Prior to all servicing:
− switch machine OFF;
− unplug power cable;
− wait for saw blade to stop.
•
•
10.1 Saw blade change
A
Danger!
Directly after cutting the saw
blade can be very hot – burning haz-
ard! Let a hot saw blade cool down.
°
Do not clean the saw blade with com-
bustible liquids. Risk of injury, even
with the blade at standstill. Wear
gloves when changing blades.
When fitting a saw blade, observe the
direction of rotation!
161
160
(163)
162
163
A
Danger!
Do not use cleaning agents
(e.g. to remove resin residue) that
could corrode the light metal compo-
nents of the saw; the stability of the
saw would be adversely affected.
(see "Available accessories") – when
using unsuitable or damaged blades
parts could be explosive-like hurled
from it by centrifugal force.
Do not use
− saw blades made of high speed
− saw blades with visible damage;
− cut-off wheel blades.
− Mount saw blade only using gen-
(160)
(161)
− Do not use loose-fitting reducing
− Saw blades have to be mounted
(162)
− Do not extend arbor bolt tighten-
− Do not tighten arbor bolt by hit-
− After the arbor bolt has been
164
(163)
(164)
10.2 Cleaning the saw blade's
A
Danger!
Use only suitable saw blades
steel (HSS or HS);
A
Danger!
uine parts.
rings; the saw blade could work
loose.
in such way that they do not wob-
ble or run out of balance and can
not work loose during operation.
(162)
(163)
A
Danger!
ing wrench.
ting the wrench.
tightened, remove all tools used
during saw blade installation!
165
166
height adjustment mech-
anism
(163)
(165)
(166)
Advertisement
Table of Contents
