Pci Pnp Menu - TYAN S7010 User Manual

3.3 - PCI PnP Menu

You can use this screen to view PnP (Plug & Play) BIOS Configuration Menu.
This menu allows the user to configure how the BIOS assigns resources & resolves
conflicts. Use the up and down arrow (/) keys to select an item. Use the Plus
and Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
Main
Advanced PCI/PnP Settings
WARING: Setting wrong values in below sections may
cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
Feature
Advanced PCI/PnP Settings
Clear NVRAM
Plug & Play OS
PCI Latency Timer
BIOS Setup Utility
Advanced PCI/PnP
http://www.tyan.com
Boot Security
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
Option
No
Clears NVRAM during system Boot.
Yes
No: lets the BIOS configure all the
Yes
devices in the system.
Yes: lets the operating system
configure Plug and Play (PnP) devices
not required for boot if your system has
No
a Plug and Play operating system.
32
This setting controls how many PCI
64
clocks each PCI device can hold the
96 bus before another PCI device takes
over. When set to higher values, every
128
PCI device can conduct transactions
160
for a longer time and thus improve the
effective PCI bandwidth.
192
Values in units of PCI clocks for PCI
224
device latency timer register.
248
71
Chipset Exit
Clear NVRAM during
System Boot.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description