TYAN S7010 User Manual page 23

Step 4: Close the CPU socket cover (A) and press the CPU socket lever down to
secure the CPU (B).
Heat Sink Installation
After installing the processor, you should proceed to install the heat sink. The CPU
heat sink will ensure that the processor do not overheat and continue to operate at
maximum performance for as long as you own them. The overheated processor is
dangerous to the motherboard.
For the safest method of installation and information on choosing the appropriate
heat sink, using heat sinks validated by Intel
Please refer to Intel's website at
The following diagram illustrates how to install heat sink onto the CPU of S7010.
Take care when installing the processor as it has very fragile
connector pins below the processor that can bend and break
if inserted improperly.
www.Intel.com
http://www.tyan.com
®
.
Place the heat sink on top of the
CPU and secure it to the
motherboard using four screws
clockwise.
23