Installation
Figure 3-7 shows the VX-3000 Ultra/CineWide with AutoScope motor assembly.
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right
Screw, Phillips Flat-Head,
3
10-32 x 1/2" (2x)
AutoScope Lens Motor 2
Screw, Phillips
1
Pan-Head,
10-32 x 3/4" (4x)
7
Standoff, 10mm x
5mm x M5,
Aluminum/Black
Anodize (4x)
Figure 3-7. VX-3000 Ultra/CineWide with AutoScope Motor Assembly – Exploded
View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector by
turning them counterclockwise until they come
out.
4
28
5
CineWide with
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
6 Screw, Phillips
Flat-Head,
Undercut,
M6 x 12mm
(4x)
VX-3000 Installation/Operation Manual