Installing The Primary Projection Lens (Vx-3000 Ultra Only) - Runco VideoXtreme VX-3000 Operation Manual

Installation
3.4
Installing the Primary
Projection Lens
(VX-3000 Ultra only)
The VX-3000 Ultra primary projection lens is shipped separately from the projector.
Proceed as follows to install it:
1. Carefully remove the projector from the
shipping container and place it on a flat
surface.
2. Loosen the Phillips screw at the bottom of
the decorative bezel on the front of the
projector.
3. Grasp the bezel by the front, then rotate and lift it upward to remove it. (Don't pull it
straight out.)
4. Carefully remove the lens from the shipping container.
22 VX-3000 Installation/Operation Manual