Installation - Runco VideoXtreme VX-3000 Operation Manual

Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Key
Virtual Cinema VCINE
To access the Installation adjustments, press MENU, then press the
highlight Installation and press ENTER. The Installation sub-menu appears. Press EXIT to
return to the previous menu or press MENU to close all menus.
When you change a setting in the Installation menu, the change takes
Note
effect immediately; you do not need to press ENTER afterwards.
(Press EXIT to return to the previous menu or MENU to exit.)
Language: Press the
French, Spanish, German and Italian.
Orientation: Press the
The VX-3000 can be installed on a ceiling or in a rear-screen configuration with one or
more mirrors. There are four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling
Rear.
VX-3000 Installation/Operation Manual
16:9 Image on
16:9 Image on
2.35:1 Screen
2.35:1 Screen
16:9 Image on
2.35:1 Screen with
Virtual Cinema
or button to select from the available languages: English,
or button to change the orientation of the projected image.
Description
A 16:9 image is scaled
NON-linearly (more on the
sides than in the center) to
fit a 2.35:1 screen.
Virtual Cinema is available
only on VX-3000 projectors
equipped with the
CineWide option.
or
63
button to

Installation

Language
Orientation
GeoCorrection
Overscan
Blue Image
Sleep Timer
Operation
Installation
English
Floor Front
>
0
Off
Off