RME Audio Micstasy User Manual page 61

DM2000
On the 'Setup – MIDI/Host' page, choose 'MIDI' for the remote layer that is going to be used.
Don't forget to confirm your choice with 'enter'!
On the Remote pages 1 to 4, enter the SysEx commands described below for each channel. In
the 'Layer' section, select the Remote layer 1 to 4 and select each channel with the 'select' but-
ton.
We recommend the use of the encoders to remote control the Micstasy's gain values. Unfortu-
nately, the described settings have to be made from scratch for every channel.
In the encoder field of the Remote page, insert the following MIDI bytes:
F0, 00, 20, 0D, 68, (bank / ID), 20, (channel gain coarse), ENC, (channel gain fine), 00, F7,
END
For the first group of 8 channels (Micstasy Bank = 1, ID = 1), set bank / ID to 00, for the second
group of 8 channels (Micstasy Bank = 1, ID = 2), set bank / ID to 01, and so on.
The Banks 2..8 can be addressed by setting bank / ID to 1x..7x, if necessary.
User's Guide Micstasy © RME
61