Id (Id); Bank (Ba); Limiter Threshold (Li) - RME Audio Micstasy User Manual

Totalgain, i64 option slot, autoset, steadyclock, synccheck, professional mic/line/instrument preamp and ad-converter 8-channel microphone / line preamp with line outputs 8-channel analog to aes / adat interface optional 64-channel madi interface 24 bit /
Hide thumbs Also See for Micstasy:
Table of Contents

Advertisement

Delay Compensation always uses the worst case, the operation of 8 units, but delays the sig-
nals individually. The amount of the respective delay is solely derived from the current ID, no
matter if it has been assigned manually or by Auto ID.

11.4 ID (Id)

Default: 01
Available settings: 01, 02, 03, 04, 05, 06, 07, 08
To remote control more than one Micstasy each device can have its own ID, providing a sepa-
rated remote control of multiple devices via a single MIDI channel.
I64 MADI Card: The ID defines the 8-channel group within the MADI signal that is used to insert
the device's audio data:
ID 01: channels 1-8
ID 04: channels 25-32
ID 07: channels 49-56
When several Micstasy, ADI8-QS or ADI-642 units are connected via MADI, Auto ID normally
takes care of the channel assignment (see chapter 11.2, Auto ID). In special cases, it may be
desirable to set the ID manually, e.g. if the first device in a MADI chain does not support the
Auto ID mode, or if a group of eight channels needs to be routed or processed in a particular
way.
With activated mode Digital Out the ID also defines which MADI input channels are sent to the
ADAT/AES outputs, see chapter 11.11.
Note: When the device is Auto ID Slave, the displayed ID can not be changed manually.

11.5 Bank (bA)

Default: 01
Available settings: 01, 02, 03, 04, 05, 06, 07, 08
To remote control more than one Micstasy each device can have its own ID, providing a sepa-
rated remote control of multiple devices via a single MIDI channel. Additionally, not only 8 IDs
but 8 banks of 8 IDs each are available.

11.6 Limiter Threshold (LI)

Default: 06
Available settings: 01, 03, 06, 12
Adjusting the threshold for the function AutoSet. Available values are -1, -3, -6 and -12 dBFS.
As soon as the current value is met, AutoSet starts to reduce the Gain. This way a headroom
equalling the threshold value is created, because the level can not be higher than the current
value.
ID 02: channels 9-16
ID 05: channels 33-40
ID 08: channels 57-64
User's Guide Micstasy © RME
ID 03: channels 17-24
ID 06: channels 41-48
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents