RME Audio M-32 AD User Manual page 20

Via MIDI remote control, all front panel controls
of the M-32 AD can be locked (Lock Keys).
An exception is the key LOCK KEYS.
Therefore a locking of all the controls can be
revoked directly at the unit at any time.
Since firmware 2.1 the fan of the M-32 AD can
be set. Additonally the internal temperature of
the M-16 and M-32 is displayed.
The software MIDI Remote also controls
RME's ADI-648, ADI-6432, ADI-642, Micstasy,
ADI-8 QS and the MADI Bridge.
The following functions can only be set via
MIDI Remote:
- Setting of Word Clock Out as Follow Clock or
Always Single Speed
- Changing the Device ID
- Fan control
Fan Modes
Cool
In Cool mode the fan runs all time with speed
3. From 48°C up it changes to speed 5 (max.),
below 45°C it switches back to speed 3.
Normal
Factory default
Silent
In Silent mode the fan starts not before 48°C
and with highest speed. Below 45°C the fan is
switched off again.
User's Guide M-32 AD © RME
20