A Note On Securing Cables - DAVIS 6370 Installation Manual

Wireless temperature station
Hide thumbs Also See for 6370:
Table of Contents

Advertisement

Wireless Temp Page 10 Thursday, December 7, 2000 2:09 PM
A N
S
OTE ON
ECURING
To prevent fraying or cutting of cables, secure them so they will not whip about
in the wind. Secure a cable to a metal pole by wrapping electrical tape around
them both. Make sure cables are secure by placing clips or ties approximately
every 3 – 5' (1 – 1.6 m).
Note: Do not use metal staples or a staple gun to secure cables. Metal staples—especially when
installed with a staple gun—have a tendency to cut the cables.
C
D
I
ONTACTING
AVIS
(510) 732-7814 for Technical Support, Monday – Friday, 7:00 a.m. – 5:30 p.m.
Pacific Time.
(800) 678-3669 Toll-Free Order Line, Monday – Friday, 7:00 a.m. – 5:30 p.m.
Pacific Time. Our customer service representatives can answer most questions
and assist you with your purchases.
(510) 732-9229 For callers outside the USA or Canada.
(510) 670-0589 Fax to Customer Service or Tech Support.
www.davisnet.com Copies of User Manuals are available on the "Support"
page. Watch for FAQs and other updates. Subscribe to the e-newsletter.
support@davisnet.com E-mail to Technical Support.
sales@davisnet.com E-mail to Customer Service.
info@davisnet.com General e-mail.
Note: Please do not return items to the factory for repair without prior authorization.
Page 10
C
ABLES
Cable Clip
NSTRUMENTS
Cable Tie
Wireless Temperature Station

Advertisement

Table of Contents
loading

Table of Contents