Citizen CBM-202PC-04 User Manual page 84

Thermal printer mechanical control lsi

Hide thumbs Also See for CBM-202PC-04:

[Function]

Executing the Macro

[Code]

<1D>H<5E>H<n1><n2><n3>

[Range]

{0 n1 FF}

{0 n2 FF}

{0 3 1}

[Outline]

Executing contents defined in macro.

Continuous execution: The Macro is executed n1 times continuously at the time intervals

Execution by LFSW:

[Caution]

[Default]

[See Also]

GS :

[Sample Program]

See Sample Program and Print Results for GS : on Page 83.

Data is described in Hex code.

"n1 ~ n3" indicate as follows:

n1 : The number of times of macro execution

n2 : Waiting time on macro execution

Waiting time of n2 100ms is given for every execution.

n3 : Macro execution mode

specified by n2.

After waiting for lapse of time specified by n2, the Alarm LED

flickers and the LF switch is waited to be pressed. When it is

pressed, the macro is executed once.

This action is repeated n1 times.

When this command is received while in macro definition, suspension of macro

definition is indicated. At this time, the defined content is cleared.

No execution takes place when macro is held undefined or n1=0.

While in macro execution with n3=1, paper feed with the LFSW (Pin 2) is not available.

Initially, this command is not specified.

[Print Results]

Mode

Continuous execution

Execution by LFSW(Pin 2)

CBM-202PC-04 User's Manual

CITIZEN