Citizen CBM-202PC-04 User Manual page 47

[Function] Collective Specifying Printing Mode
[Code] <1B>H<21>H<n>
[Range] { 0 n FF }
[Outline] Printing mode is assigned.
[Caution]
[Default] n = 0
[See Also] ESC E, ESC –
Data is described in Hex code.
Bit Function
0 Character Font
1 Undefined
2 Undefined
3 High-lighting
4 Double height
5 Double width
6 Undefined
7 Underline
With double height and double width being specified simultaneously, double wide and
double high characters are consisted.
An underline is attached to the full character width, which, however, is not attached to
the part having been skipped by the horizontal tab. Neither is it attached to 90
-right-turned characters.
The underline width is as having been specified by <ESC - >. (The default setting is 1
dot width. )
Specification with this command is invalid to Kanji, except specification and
cancellation of highlighting
In case that double height character and normal character exist in same one line, the
layout of underline is consistent one.
Each n bit indicates the following:
Font A
Canceled
Canceled
Canceled
Canceled
47
CBM-202PC-04 User's Manual
Value
0
Font B
Specified
Specified
Specified
Specified
1
CITIZEN