Advertisement
[Function]
Printing the Bar Code
[Code]
<1D>H<6B>H<n> [ < d> ] k <00>H
[Range]
{0 n 7}
[Outline]
Specifying a type of bar code and printing bar codes.
[Caution]
[Default]
[Description of Bar Codes]
UPC-A
This bar code, consisting of numerals only, has a fixed length of 12 columns; a 11 columns
number entered from the host or application software plus a check column(12th column)
automatically calculated inside the printer.
host, the entire bar code will be printed as it is.
Data are described in Hex code.
The beginning of line is considered as the next printing start position.
Depending on the value of n, the following bar cod e can be selected.
d indicates a character code to be printed and k indicates the number of character to be
printed.
n (Hex)
0
1
2
3
4
5
6
7
When data being held in the print buffer, this command is ignored.
Regardless of the specified feed pitch, this command feeds the paper to be required to
print a bar code.
If the character code d cannot be printed in the respective bar code system, the bar
code so far will be printed, processing the subsequent data as normal data.
When a bar code whose number of characters to be printed is fixed has been selected,
the number of characters k have to be always made equal to the number of characters
to be printed.
(The bar code is not printed when not matching.)
When the horizontal direction exceeds one line length, the excess part is not printed.
The initial value is not specified.
<For print examples, see Page 75.>
Bar Code System
UPC-A
UPC-E
JAN13 (EAN)
JAN
8 (EAN)
CODE 39
ITF
CODABAR (NW-7)
CODE 128
If the 12th-column numeral is sent from the
72
CBM-202PC-04 User's Manual
Maximum Columns
---
---
---
---
13
22
17
15
CITIZEN
Advertisement
