Starting Diagtools From A Diskette; If There Is A Problem - HP Kayak XU700 User Manual

Hp kayak pc workstations and hp vectra pcs - diagtools user guide

Hide thumbs Also See for Kayak XU700:

Table of Contents

1 Starting DiagTools

Starting DiagTools from a Diskette

Once you have created the diskette(s), you can start the Hardware

Diagnostics. To do this:

1 Insert the diskette into the flexible disk drive. If there is more than

one diskette, insert the "First" or "Boot" diskette.

2 Quit all applications, shut down the operating system, and restart

your PC. To do this in Windows 95 or Windows NT 4.0, click the Start

button then select

3 The PC will then start from the diskette. After loading the system

files, it will decompress the necessary files. Then DiagTools will start

automatically, displaying the Welcome screen (refer to page 11).

You may experience one of the following problems:

PC does not boot (start) from the diskette.

•

This happens when the PC ignores the diskette and starts from the

hard disk drive as normal, running your operating system. The

problem could be:

a The Setup program of your PC may not be correctly configured.

Ensure that the option to start from the flexible disk is enabled.

(Refer to "More Information About The PC's Setup Program" on

page 7.)

b There may be problem with the flexible disk drive or the internal

cable connections. Contact your local or HP-dedicated Support

Agent.

English

Shut Down – Restart PC

Table of Contents

Diagtools