Updating The Hardware Diagnostics Files (For Network Administrators); If Your Net Vectra Pc Does Not Have The Correct; Boot Configuration - HP Kayak XU700 User Manual

Using TopTools Ver. 2.5
Management Console
Using TopTools for
Desktops Device
Manager Ver.3.0
NOTE FOR
NET VECTRA PCS
1 Starting DiagTools
Installing and Setting Up DiagTools
Updating the Hardware Diagnostics Files
(For Network Administrators)
To know if you have TopTools in Windows 95 or Windows NT 4.0, click
the button and look for
Start
If you are a network administrator, you can update the Hardware
Diagnostics files on remote client PCs.
To update the Diagnostics files on remote PCs, select the
page of TopTools, click the
To update the Diagnostics files on remote PCs, open the TopTools for
Desktops Device Manager in Internet Explorer (version 4.01 or above).
Right-click on
Devices>Device Types,
in the window that appears. Use shift-click or control-click
Computers
to select the DMI 2.x compliant PCs you want to update and right-click.
Select
Distribute Diagnostics
follow the onscreen instructions.
For more information about using TopTools, refer to the TopTools
online help in the
Help
http://www.hp.com
To run DiagTools from the hard disk drive, the PC must have
the correct boot (start) configuration. All Net Vectra PCs are
provided with a ready-to-use Hardware Diagnostics dual boot
configuration.

If Your Net Vectra PC Does Not Have The Correct

Boot Configuration

The Net Vectra PC is usually provided with a dual boot configuration
for running Hardware Diagnostics. Your Net Vectra PC must have this
configuration before you can run DiagTools from the hard disk drive.
Contact your network administrator for assistance or, alternatively,
contact your local or HP-dedicated Support Agent.
6 English
TopTools
button, and follow the instructions.
Update
and select
from the menu that appears and
menu and to HP's Web site at
..
in the menu.
Programs
DiagTools
Personal