Before Running DiagTools
Before you run the Hardware Diagnostics, ensure that the following are
correctly configured with the HP Setup program:
All
Hardware Protection
or
Enabled
Unlocked
No operating system is specified, which means that:
if the
menu has an item
•
Main
if the
menu has an item to select the operating system, set
•
Main
it to
.
Other
More Information About The PC's Setup Program
Setup is an integrated (ROM-based) program that displays the PC's
configuration and allows you to change the configuration parameters.
Setup changes system behavior by modifying the power-on
initialization parameters. Setting incorrect values may cause the PC to
fail at start-up. If this occurs, press F9 in the Setup program. This will
load the Setup default values and allow the PC to recover.
To enter the PC's Setup program, restart the PC and press F2 when the
Vectra Logo or Kayak logo screen (or the Summary screen) appears.
items in the
Security
.
Running Windows 95
1 Starting DiagTools
Before Running DiagTools
menu are set to
, set it to
No
English
7