2 Starting e-Diagtools
Before Starting e-Diagtools
Before Starting e-Diagtools
This section applies to Business PCs and Workstations. If you have an HP Notebook PC,
skip this section and go directly to "Option 2: Starting e-Diagtools on HP Notebook PCs"
on page 23.
Before you start e-Diagtools, do the following:
1 Enter the computer's BIOS Setup program.
To enter the Setup program on new Business PCs, restart the computer, press
•
then select the option to enter the Setup program.
To enter the Setup program on other HP computers, restart the computer and
•
press
when the HP logo appears.
F2
2 If present, ensure all
or
Enabled
Unlocked
3 If you are using a CD-ROM to run e-Diagtools, ensure the option to start from the
CD-ROM is enabled and the CD-ROM is configured to be the first device to boot from.
After running e-Diagtools, you can restore the original Setup values.
20
English
Hardware Protection
.
items in the
Security
,
F8
menu are set to