HP Kayak XU 03xx Manual page 4

HP Kayak XU 03xx PC Workstation Configuring a SCSI Accessory
SCSI Channel Interface Definitions:
•
Host Adapter SCSI ID
Changes the adapter SCSI ID from its default value of 7.
•
SCSI Parity Checking
Enable or disable host adapter SCSI parity checking. Most currently
available SCSI devices do support SCSI parity. You should disable
SCSI Parity Checking if any of the attached SCSI devices do not
support SCSI parity.
Additional Options:
•
Boot Device Options
Press
described on the next page.
•
SCSI Device Configuration
Press
•
Array 1000 BIOS
This option is enabled by default, and instructs the system to use the
special BIOS for the FastRAID option. If you disable this option and
re-boot, the system will use its normal BIOS and FastRAID will be
disabled.
•
Advanced Configuration Options
Press
4 English
to display the Boot Device Configuration menu,
to display the SCSI Device Configuration menu.
(only if HP FastRAID is installed)
to view the Advanced Configuration Options menu.