Alpine MULTIMEDIA MANAGER PXA-H701 Owner's Manual page 41

Installation and Connections
• PXA-H701 + IVA-D300 series Head Unit + CD Changer +
Navigation System + External Amplifier
White/Green
Guide Control Cable
CENTER
SELECTABLE
(L) SUBWOOFER
(R)
CONTROL UNIT
FRONT 1 FRONT 2 REAR SUBWOOFER OUTPUT
(FULL RANGE
/TWEETER)
Centre Output or Subwoofer Output (L)*
Subwoofer Output or Subwoofer Output (R)*
Rear Output (L)
Rear Output (R)
Front 2 Output (L)
Front 2 Output (R)
Front 1 Output (L)
Front 1 Output (R)
NOTE
Also refer to the operating instructions of the KCE-900E. For
details, contact your store of purchase or an Alpine Information
Center.
Please observe the following when using Fiber Optic
Cable.
• Do not coil the Fiber Optic Cable smaller than a 30mm radius.
• Do not place anything on top of the Fiber Optic Cable.
40
-EN
White/Green
Guide Control Cable
GUIDE OUTPUT
RCA connection cable
Fiber Optic Cable (Sold Separately)
CD/DVD H.U. CHG DVD
MIC DIGITAL 1 DIGITAL 2 DIGITAL 3
INPUT GUIDE (L) (R)
Ai–NET IN CHANGER IN
POWER SUPPLY
ANALOG 1
ANALOG 2 ANALOG 3
NTSC
RGB
VIDEO OUTPUT
NAVIGATION
INPUT
NTSC VIDEO
OUTPUT RGB OUTPUT REMOTE INPUT
KCE-900E
(Sold Separately)
RGB Cable
(Sold Separately)
IVA-D300 series
#
Fiber Optic Cable
(Sold Separately)
Ai-NET Cable
(Included with CD Changer)
Ai-NET Cable (Included)
Blue/White
Remote OUT Cable
Blue/White
Remote ON Cable
Grounding Cable
Battery Power Cable
* When the subwoofer is connected to the
centre speaker output jack, it becomes
subwoofer output (L or R).
To External
Amplifier
In this case, change the setting of the
centre speaker to subwoofer in "Setting
the speakers" (page 4).
NOTES
#
##
Navigation
Head Unit
##
Ai-NET Compatible
CD Changer
To External Amplifier Remote ON Cable
Not used in this system
Connect to a metal part of
chassis body with a screw.
When connecting a Optical Digital CD
Changer
When connecting a Optical
Digital CD Changer, change
the Digital/Analog switch of
the CD Changer to "2"
(Digital Output)
Battery
1 2