Examples Of System Expansion - Alpine MULTIMEDIA MANAGER PXA-H701 Owner's Manual

Examples of system expansion

• PXA-H701 + Ai-NET Compatible Head Unit + DVD Changer +
Monitor + External Amplifier
CENTER
SELECTABLE
(L)
SUBWOOFER
CD/DVD H.U.
MIC DIGITAL 1
(R)
CONTROL UNIT
FRONT 1 FRONT 2 REAR SUBWOOFER OUTPUT INPUT GUIDE
(FULL RANGE
/TWEETER)
* When the subwoofer is connected to the
centre speaker output jack, it becomes
subwoofer output (L or R).
In this case, change the setting of the centre
speaker to subwoofer in "Setting the speakers"
(page 4).
NOTE
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30mm radius.
• Do not place anything on top of the Fiber Optic Cable.
Fiber Optic Cable (Sold Separately)
Fiber Optic Cable (Included with DVD Changer)
Ai-NET Cable (Included with DVD Changer)
Ai-NET Cable (Included)
CHG DVD
DIGITAL 2 DIGITAL 3
(L) (R)
Ai–NET IN CHANGER IN
POWER SUPPLY
ANALOG 1
ANALOG 2 ANALOG 3
Remote OUT Cable
Remote ON Cable
Guide Control Cable
Grounding Cable
Battery Power Cable
Centre Output or Subwoofer Output (L)*
Subwoofer Output or Subwoofer Output (R)*
Rear Output (L)
Rear Output (R)
Front 2 Output (L)
Front 2 Output (R)
Front 1 Output (L)
Front 1 Output (R)
#
Remote Control Output Cable
Monitor
(TME-M790 etc.)
To Video Input Jack
Ai-NET Compatible
Blue/White
To External Amplifier Remote ON Cable
Blue/White
Not used in this system
White/green
Not used in this system
Connect to a metal part of
chassis body with a screw.
To External Amplifier
NOTE
# Used for connection to an optical digital
compatible head unit.
Remote Control
Input Cable
(White/Brown)
(White/Brown)
RCA Connection Cable
To Video Output Jack
DVD Changer
Head Unit
System Switch
EQ /
DIV
Battery
FR
ES
DE
IT
SE
37
-EN