Advertisement
Quick Links
Important Notice
WARNING: This aftermarket plug-and-play audio system for Tesla vehicles ("Product") is intended for
installation by quali ed professionals with experience in automotive electrical systems. Improper installa-
tion can result in serious damage to your vehicle, electrical system, and personal injury or death. By
purchasing and/or installing this Product, you acknowledge and agree to the following:
Installation at your own risk: You assume all responsibility and risk associated with the installa-
tion of this Product. Neither Alps Alpine North America, Inc. nor its a liates are responsible for
any damage or injury caused by improper installation.
The installation of this product requires specialized skills and experience. We recommend that
you have the product installed by an Alpine authorized dealer
Potential for electrical damage: Improper installation can cause electrical damage to your Tesla
vehicle, including, but not limited to, blown fuses, shorts, res, and damage to sensitive elec-
tronic components and batteries.
No warranty for improper installation: This Product's warranty is expressly limited to manufac-
turing defects and does not cover any damage caused by improper installation.
ASSUMPTION OF RISK: YOU ACKNOWLEDGE AND AGREE THAT YOU ARE KNOWINGLY ASSUM-
ING THE RISK OF DAMAGE TO YOUR TESLA VEHICLE AND/OR PERSONAL INJURY OR DEATH BY
INSTALLING THIS PRODUCT YOURSELF AND THAT INSTALLING THIS PRODUCT MAY AFFECT OR
RESULT IN TERMINATION OF YOUR LIMITED WARRANTY WITH TESLA.
LIMITATION OF LIABILITY: TO THE FULLEST EXTENT PERMITTED BY LAW, ALPS ALPINE NORTH
AMERICA, INC. AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATED TO THE
INSTALLATION OR USE OF THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, DAMAGE TO
YOUR TESLA VEHICLE, PERSONAL INJURY, PROPERTY DAMAGE, OR RENDERING YOUR LIMITED
WARRANTY INEFFECTIVE.
We strongly recommend consulting your Tesla owner's manual or quali ed professional for speci c
installation instructions. We recommend reviewing all online resources and tutorials available for your
speci c Tesla model before attempting installation. If you are unsure about any aspect of the installation
process, please consult a quali ed professional.
PSS-TSLA
20240320v3
Tesla Model 3
1/14
Advertisement
Related Manuals for Alpine PSS-TSLA
Summary of Contents for Alpine PSS-TSLA
- Page 1 Installation at your own risk: You assume all responsibility and risk associated with the installa- tion of this Product. Neither Alps Alpine North America, Inc. nor its a liates are responsible for any damage or injury caused by improper installation.
- Page 2 Tesla Model 3 PSS-TSLA 20240320v3 2/14 Tesla Model 3/Y Power UP & Down Procedure WARNING: Before beginning install on your tesla follow the below procedure. IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
- Page 3 Tesla Model 3 PSS-TSLA 20240320v3 3/14 Tesla Model 3/Y Power UP & Down Procedure WARNING: Before beginning install on your tesla follow the below procedure. IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
- Page 4 Tesla Model 3 PSS-TSLA 20240320v3 4/14 Installation Instructions (Integration Harness) To access the front factory ampli er you need access the First remove the under dashboard trim panel (#1) by front passenger kick panel. releasing all retaining clips and pulling.
- Page 5 There are two connectors on the ampli er Disconnect the 2 bottom male connectors from factory amp and replace with plugs (A + B) from the Alpine Tesla Harness. Transfer the disconnected connectors into the open ends of the Alpine Harness.
- Page 6 Route cable G behind the trunk lining trim, (Plug G) (Plug H & I) High level input and DSP output connect to connects to the subwoofer enclosure located behind the the Alpine Amp PXE-X121-12EV rear passenger tire well.
- Page 7 (Under the seat) Use a socket to remove the battery post hardware nuts Connect the Alpine harness Positive and Negative lug to Route 12V Power Harness (Plug J) from rear bench seat to the low voltage battery posts under the rear seat &...
- Page 8 Tesla Model 3 PSS-TSLA 20240320v3 8/14 Installation Instruction (Power Harness CP1-S Module) FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
- Page 9 Remove (2) T20 bolts securing the factory tweeter Use T20 Torx. A Shallow Ratcheting Torx Bit is required. Secure all Alpine speakers to the dash by Re-installing all remaining factory T20 Torx. After speakers are mounted Install the dashboard speaker cover panel by applying uniform pressure to engage the factory clips.
- Page 10 The factory Adapter should then unclip easily. (Note: Some cables are non removable leave the door panel resting on a soft ground surface) Install the new Alpine Speaker & Adapter to the door panel using the factory screws. Plug in green factory speaker adapter plug Plug in all remaining factory door connectors.
- Page 11 Install the new Alpine Tweeter to the housing by twisting and pulling. positioning the lock tabs and clipping into place. Plug in the original factory connector to the new alpine tweeter and pop the housing into place using downward pressure along the factory clips. Make sure it securely...
- Page 12 Using a Drill Bit, Drill out 3 Plastic Rivets on each Factory Using hand screw driver nstall the new Alpine Speaker to Door Speaker. Use Care to not over-drill the screw boss the door panel using the (6) supplied phillips tapping screws &...
- Page 13 Tesla Model 3 PSS-TSLA 20240320v3 13/14 Rear Hatch Speaker Installation (EV-40M-T) FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
- Page 14 2 factory bolts, if equipped with Premium audio After removed do not lose the factory clips. Mount the new subwoofer box and install the factory Installed the Alpine supplied nut to the third factory bolt hardware to the two mounting positions location.
Need help?
Do you have a question about the PSS-TSLA and is the answer not in the manual?
Questions and answers