Alpine MULTIMEDIA MANAGER PXA-H701 Owner's Manual page 39

Installation and Connections
• PXA-H701 + Ai-NET Compatible Head Unit + CD Changer +
External Amplifier
CENTER
SELECTABLE
(L) SUBWOOFER
MIC
(R)
CONTROL UNIT
FRONT 1 FRONT 2 REAR SUBWOOFER OUTPUT INPUT
(FULL RANGE
/TWEETER)
* When the subwoofer is connected to the
centre speaker output jack, it becomes
subwoofer output (L or R).
In this case, change the setting of the centre
speaker to subwoofer in "Setting the speakers"
(page 4).
NOTE
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30mm radius.
• Do not place anything on top of the Fiber Optic Cable.
38
-EN
Fiber Optic Cable (Sold Separately) ##
Fiber Optic Cable (Sold Separately)
Ai-NET Cable (Included with CD Changer)
Ai-NET Cable (Included)
CD/DVD H.U. CHG DVD
DIGITAL 1 DIGITAL 2 DIGITAL 3
GUIDE (L) (R)
Ai–NET IN CHANGER IN
POWER SUPPLY
ANALOG 1
ANALOG 2 ANALOG 3
Remote OUT Cable
Remote ON Cable
Guide Control Cable
Battery Power Cable
Centre Output or Subwoofer Output (L)*
Subwoofer Output or Subwoofer Output (R)*
Rear Output (L)
Rear Output (R)
Front 2 Output (L)
Front 2 Output (R)
Front 1 Output (L)
Front 1 Output (R)
#
Blue/White
To External Amplifier Remote ON Cable
Blue/White
Not used in this system
White/green
Not used in this system
Grounding Cable
NOTES
#
##
### When connecting a Optical Digital CD
Ai-NET Compatible
Ai-NET Compatible
Head Unit
System Switch
EQ /
DIV
Connect to a metal part of
chassis body with a screw.
To External Amplifier
When connecting a Optical Digital CD
Changer
Used for connection to an optical
digital compatible head unit.
Changer, change the Digital/Analog
switch of the CD Changer to "2"
(Digital Output)
1 2
###
CD Changer
Battery