Changing The Light Bulb - AEG CHDD 8694 Operating And Installation Instructions

Warning
• Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the main supply.
• Remove the lamp cover, use a screw driver as a lever. Fig. 6.
• Replace the old bulb with a new one of the same type.
• Remount the lamp cover.
• If the light does not come on, make sure the bulb has been inserted
correctly before contacting your local Service Force Centre.
Fig. 6
13