Open The Metal Grease Filter - AEG CHDD 8694 Operating And Installation Instructions

Open the metal grease filter

• First, push both metal grease filter handles towards the centre, then
extract the filter M, pulling downwards. Fig. 4.
Repeat the steps with the second filter.
Hand washing
Soak grease filters for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when they are dry.
Dishwasher
Place grease filters in the dishwasher. Select most powerful
washing programme and highest temperature, at least 65°C.
Repeat the process. Refit the grease filters when they are dry.
When washing the metal grease filter in the dishwasher a slight
discolouration of the filter can occur, this does not have any impact
on its performance.
• Clean the inner housing using a hot detergent solution only (never
use caustic detergents, abrasive powders or brushes).
Fig. 4
11