Zoom Handy recorder H2 Operation Manual page 9

Left side panel
[PHONES/LINE OUT]
jack
VOLUME [+]/[-] keys
[POWER] switch
[DC 9V] jack
Bottom panel
Internal clock date/time setting
The H2 has an internal clock that is used for time stamping of files created during
recording. When you turn the H2 on for the first time, a message asking you to set
the date/time appears. Follow the instructions in the section "Setting the date and
time" on page 78.
Note that if you skip this step, the clock will be set to the default (2007/01/01).
ZOOM H2
[SD CARD] slot cover
Open
Parts of the H2
Right side panel
[EXT MIC IN]
jack
[MIC GAIN]
switch
[LINE IN] jack
[USB] port
[SD CARD] slot
9