Zoom Handy recorder H2 Operation Manual page 34

4-Channel Mode Recording
6.
Adjust the 3D panning setting.
O
To move the symbol up or down, use the
4 (MENU) key and 1 (PLAY/PAUSE)
O
key. To move the symbol left or right, use
the 3 (REW) key and 2 (FF) key. To
accept the current position (balance setting),
press the 5 (REC) key. The 3D PAN menu
appears again.
To return to the 4-channel mode top screen,
press the 4 (MENU) key repeatedly.
HINT
After making 3D panning adjustments using a
pair of stereo files recorded in 4-channel
mode, you can save the result as a single
stereo file (→ p. 57).
NOTE
• The 3D panning setting is not stored
individually for each file. Rather, there is only
one setting that applies to all files. Keep in
mind that even if you select a different file
pair, the 3D panning setting will not change.
• To return the 3D panning setting to the
default condition, move the cursor to
"RESET" on the 3D PAN menu and press the
5 (REC) key.
34 ZOOM H2