Assigning A Name To A File (Stereo Mode Only) - Zoom Handy recorder H2 Operation Manual

File Operations
scroll the screen.
Stereo mode
NAME File name (including extension)
DATE Recording date
File format / Sampling frequency /
FORMAT
Quantization
SIZE Size in kB or MB units
TIME Recording time (Hours:Minutes:Seconds)
4-channel mode
Front stereo file name (including
FRONT
extension)
Rear stereo file name (including
REAR
extension)
DATE Recording date
File format / Sampling frequency /
FORMAT
Quantization
SIZE Size in kB or MB units
TIME Recording time (Hours:Minutes:Seconds)
5.
Return to the top screen.
Repeatedly press the 4 (MENU) key until
the stereo mode or 4-channel mode top
screen appears again.
50
Assigning a name to a file
(stereo mode only)
For files recorded in stereo mode, a name is
automatically assigned, using the pattern
"STE-xxx.WAV" or "STE-xxx.MP3" (where
xxx is a number from 000 to 999). The file
name can be changed as follows.
NOTE
• The steps described here cannot be
performed while the recorder is operating.
Stop recording or playback before carrying
out these steps.
• The names of files created in 4-channel
mode cannot be changed.
1.
Bring up the stereo mode main
menu screen.
At the stereo mode top screen, press the 4
(MENU) key.
2.
Bring up the FILE MENU screen.
Repeatedly press the 3 (REW)/2 (FF)
keys to move the cursor to "FILE" and press
the 5 (REC) key.
3.
Select the file whose name you
want to change.
Use the 3 (REW)/2 (FF) keys to move the
cursor to the file and press the 5 (REC) key.
The name of the currently selected file is
shown at the top of the screen. Available
file operations are listed in the lower part of
the screen.
4.
Bring up the FILE RENAME
screen.
Use the 3 (REW)/2 (FF) keys to move the
ZOOM H2