Zoom Handy recorder H2 Operation Manual page 77

Connecting the H2 to a Computer
canceled, the USB screen appears again.
HINT
If the unit was started on USB power, settings
are saved when you move the cursor to "EXIT"
and press the 5 (REC) key to cancel the
connection.
9.
Return to the top screen.
Repeatedly press the 4 (MENU) key until
the stereo mode or 4-channel mode top screen
appears again.
NOTE
When the unit was started on USB power, you
cannot return to the screen before the AUDIO
I/F screen of step 4 . To return to the top
screen, disconnect the USB cable to turn
power off, and then set the [POWER] switch of
the H2 to ON to start it up normally.
ZOOM H2 77