Checking The Ink Volume; Machine Information; Checking The Serial Number; Packing And Shipping The Machine - Brother DCP-385C User Manual

Checking the ink volume

You can check the ink that is left in the
cartridge.
a
Press Ink Management.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh
Software User's Guide on the CD-ROM.)

Machine Information

Checking the serial number

You can see the machine's serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.
84
Packing and shipping
B
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
It is important to allow the machine to 'park'
the print head after a print job. Listen
®
or
carefully to the machine before unplugging
® it to make sure that all mechanical noise
in the
has stopped. Not allowing the machine to
finish this parking process may lead to print
problems and possible damage to the print
head.
B
a
Open the ink cartridge cover.
B
b
Press the ink release lever to release
the ink cartridge and take out all the ink
cartridges.
(See Replacing the ink cartridges
on page 77.)
c
Install the green protective part and then
close the ink cartridge cover.
CAUTION
B