Printing Images; Understanding The Error Messages - Brother DCP-385C User Manual

Chapter 6

Printing Images

Note
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
1
1 USB direct interface
b
Turn on the camera.
c
Follow the steps in Print Images
on page 37.
WARNING
To prevent damage to your machine, do not
connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
54
Understanding the
6
Error Messages
Once you are familiar with the types of errors
that can occur while you are using PictBridge,
you can easily identify and troubleshoot any
problems.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
Unusable Device
This message will appear if you connect a
camera that is not using the USB Mass
Storage standard. This message will also
appear if you connect a broken device to
the USB direct interface.
For more detailed solutions see Error and
Maintenance messages on page 72.
6