Entering Photocapture Mode; Print Images; View Photo(S) - Brother DCP-385C User Manual

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, press the
(Photo Capture) key to illuminate it in
blue and display the PhotoCapture options on
the LCD.
The LCD shows:

View Photo(s)

Print Index Print Index
Print Photos Print Photos
Enhance Photos Enhance Photos
Search by Date Search by Date
Print All Photos Print All Photos
PHOTO
Press a or b to scroll through the
Photo Capture key options.
View Photo(s) (See page 37.)
Print Index (See page 38.)
Print Photos (See page 38.)
Enhance Photos (See page 39.)
Search by Date (See page 42.)
Print All Photos (See page 43.)
Slide Show (See page 43.)
Trimming (See page 44.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 44.
When the option you want is highlighted,
press OK.
Printing photos from a memory card or USB Flash memory drive
5
View photos on the LCD View photos on the LCD
and select the images and select the images
you want to you want to
print. print.
Select & Press OK

Print Images

View Photo(s)
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press a or b to choose
View Photo(s).
Press OK.
c
Press d or c to choose your photo.
d
Press + or - repeatedly to enter the
number of copies you want.
e
Repeat step c and step d until you
have chosen all the photos.
Note
Press Clear/Back to go back to the
previous level.
f
After you have chosen all the photos, do
one of the following:
Press OK and change the print
settings. (See page 45.)
If you do not want to change any
settings, press Colour Start to print.
5
5
5
37