Software Difficulties; Photocapture Center™ Difficulties - Brother DCP-385C User Manual

Software Difficulties

Difficulty
Cannot install software or print.
'Device Busy'
Cannot print images from
FaceFilter Studio.
PhotoCapture Center™ Difficulties
Difficulty
Removable Disk does not work
correctly.
Cannot access Removable Disk
from Desktop icon.
Part of my photo is missing when
printed.
70
Suggestions
Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair
and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the CD-ROM supplied with your machine. To install FaceFilter Studio see the
Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned On and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
Suggestions
1 Have you installed the Windows
1) Unplug the USB cable.
2) Install the Windows
Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup Guide.)
Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the memory card or USB Flash memory drive and put it back in again.
3 If you have tried 'Eject' from within Windows
USB Flash memory drive before you continue.
4 If an error message appears when you try to eject the memory card or USB
Flash memory drive, it means the card is being accessed. Wait a while and
then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure that you have correctly inserted the memory card or USB Flash
memory drive.
Make sure that Borderless Printing and Cropping are turned off. (See Borderless
printing on page 48, and Cropping on page 48.)
®
2000 update? If not, do the following:
®
2000 update using one of the following methods.
®
, take out the memory card or