Turning The Printer Off - Canon Satera LBP5610 User Manual

Turning the Printer OFF

Turn the printer OFF using the following procedure. The operation to turn the printer
OFF is different in whether using the hard disk or not.
IMPORTANT
When using the hard disk, be sure to turn the printer OFF as the procedure for the
•
protection of the hard disk. (See p. 6)
If the printer is used on a network, make sure that it is not printing data from another
•
computer before turning the printer OFF.
If turning the printer OFF with the
•
deleted. Turn the printer OFF after necessary print data completing to be output or being
output by selecting <
Do not turn the printer OFF when the printer is in any of the following status:
•
- During printing.
- While the printer is running a self-diagnostic test immediately after turning the power
ON
- When the messages informing you that the NVRAM is being initialized or being written
is displayed.
- While <
When you are using a hard disk, make sure that HDD indicator is not on. If turn the
•
printer OFF while the HDD indicator is on (while data is being read from the hard disk or
being written to the hard disk), the hard disk may be damaged and disabled.
4
The indicators of the control panel and the display come on, and the printer
initiates a self-diagnostic test on the printer unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the
and the indicator, and the selected paper source display indicator comes
on, <
and the printer can be ready to print.
Paper source
indicator display indicator indicator
The following information is displayed on the display.
Ready to print and no
processing print data
> , <00 LIPS>, or <00 ESC/P> comes on the display
indicator being on, remaining print data will be
> with pressing [
> or <
indicator
Paper size in the paper
source that is selected
currently
] offline.
> is displayed.