Turning The Printer On/Off (For 5910/5910F); Turning The Printer On - Canon Satera LBP5610 User Manual

Turning the Printer ON/OFF (For 5910/5910F)

The power switch to turn the printer ON or OFF is located on the right side of the
printer. Be sure to observe the following instructions in order to prevent unexpected
problems.

Turning the Printer ON

In order to use this printer, you should press " " of the power switch to turn the
printer ON. After running a self-diagnostic test on the printer unit and optional
accessories, the printer will be ready to print.
IMPORTANT
Do not turn the power ON immediately after turning it OFF. If you want to turn the printer
•
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
Be sure to set the paper cassette in the printer before you turn the power ON for the first
•
time after you install the printer.
NOTE
When turning the printer ON for the first time after installing the hard disk, or when being
malfunction in the hard disk, it takes approx. 60 seconds to be ready to print because of
formatting after turning the printer ON.
1
Press " " of the power switch on the printer.
3