Message List (Only For Lbp5910/5910F) - Canon Satera LBP5610 User Manual

Message List
If the printer cannot print for any reason (an error is occurring) when using the
printer, warning beep sounds, the
message that indicates the contents of the trouble) appears on the display. When
any remedy is required although this status does not affect the job (Warning), a
warning message appears on the display.
When these messages are displayed, follow the instruction in the message and
take the following measures.
NOTE
When multiple warnings occur at the same time, warning messages are displayed
•
alternately.
When an error and warning occur at the same time, the warning message is not
•
displayed.
When the message with <Warning Message> appears, the message does not appear in
•
case of setting <
When the message with <Error Skip> mark appears, you can perform the error skip and
•
continue to print by pressing [
printer may not print properly. When canceling the processing, perform the operation of
the soft reset, clear the cause of error off, press [
message with this mark appears, the error skip can be performed in case of setting <
166
(Only for LBP5910/5910F)
> in the <
Message
Cause
Remedy Load the paper properly.
Cause
Remedy Close the front cover firmly. If the printer is
Cause
Remedy Remove jammed paper and return the
indicator comes on, and an error
> in the menu to <
], however, the print data may be missed and the
> menu to < > .
Cause and Remedy
The paper size that is specified from an
application is not loaded (when paper
source mode is <
paper sources, when paper source mode is
fixed, this indicates specified paper source).
The front cover is open.
not online, press [
Paper jam inside the printer.
paper cassette and the cover to the original
position. If the printer is not online, press [
].
>.
] and print again. When the
>, this indicates all
].